The CQI-9 Heat Treat Assessment 4th edition webinar, recorded live on September 17, 2020, focused on the most significant changes in each section of the new edition. This is your opportunity to hear from members of the AIAG Heat Treat Work Group
companies that service the heat treat industry, the Special Process: Heat Treat System Assessment 4th edition (CQI-9) is a comprehensive audit covering the most common heat treat processes employed by the automotive industry, intended to provide a common
The CQI-12 Coating System Assessment 3rd edition was developed to provide much more detail on pyrometry requirements, including instrumentation, thermocouple checks, and temperature uniformity surveys, where appropriate. Additional updates
The CQI-27 Special Process: Casting System Assessment provides requirements for foundry suppliers of OEM automotive castings. It is not a detailed description of the entire foundry process. Rather, the focus is on common failure modes that cause
The goal of the CQI-23, Special Process: Plastic Molding System Assessment, is to provide a common assessment tool for the industry resulting in reduction in variation, less warranty claims, less leaks and recalls.
Benefits of doing
and materials.Special Process: Electronic Assembly Manufacturing-Soldering [CQI-17]The goal of the 2nd edition CQI
The Special Process: Welding System Assessment 2nd edition (CQI-15) is a comprehensive audit covering all variations of welding intended to provide a common approach to a welding management system for automotive production and service part
The Special Process: Plating System Assessment (CQI-11) 3rd edition was developed with the intent to help better evaluate the quality systems in place at plating shops supplying OEM automotive coatings such as zinc and zinc alloy electrodeposits
The Brazing Work Group developed the CQI-29 Special Process: Brazing System Assessment (BSA 1st edition) to validate the effectiveness of Brazing processes throughout the entire supply chain. The BSA 1st edition is a comprehensive audit covering
This new work group is meeting to develop the new CQI-30 Special Process: Rubber Processing System Assessment – Mixing & Molding.
The goal of the Rubber Processing System Assessment is the development of a rubber mixing
and verify the effectiveness of an organization's traceability system.CQCAQUALITYCQI-28
SPC QuickStart GuideThe new CQI-25 SPC Quick Start Guide is a supplement to the full SPC Manual and provides the building blocks of statistical process control for those who are new to the topic or have only experienced SPC from a limited
Layered Process Audit GuidelineThe CQI-8 guideline integrates LPA with management of Key Performance Indicators (KPIs) resulting in LPAs having a positive impact on business results. Other highlights include recommendations for expanding
an assessment tool, and No Trouble Found case studies to guide an organization to proactively reduce warranty incident rates associated with warranty events.CQWRQUALITYCQI-14-4
of variation and waste in the supply chain. Application of this process will allow you to meet regulatory requirements and identify areas of improvement while enhancing customer satisfaction.CQPLQUALITYCQI-11
improvement, emphasizing defect prevention and the reduction of variation and waste in the supply chain, and includes a downloadable assessment with forms to complete the assessment.CQMLQUALITYCQI-23
Special Process: Casting System AssessmentThe CQI-27 Special Process: Casting System Assessment provides requirements for foundry suppliers of OEM automotive castings. It is a collective effort by OEM and Tier 1 customers to create common
to the next level today!QUALITYCQI-22
SPC Short Run SupplementThe SPC Short Run Supplement (CQI-26) guideline was developed to address the particular uniqueness of short run production, where suppliers do not have the production volume to readily apply the approaches identified
Special Process: Coating System Assessment 3rd EditionThe new CQI-12 Special Process: Coating System Assessment was developed to help better evaluate quality systems at coating shops supplying OEM automotive coatings. Now in its third edition
, and the addition of two additional processes: Fastener Projection Welding and Magnetically Impelled Arc Butt (MIAB) Welding. Get your copy today!CQWLQUALITYCQI-15-2
Special Process: Electronic Assembly Manufacturing-SolderingThe goal of the 2nd edition CQI-17 Special Process: Electronic Assembly Manufacturing - Soldering System Assessment (EAM-SSA) is the development of a soldering management system
, and lists qualifications for supplier development "coaches", resulting in higher quality and lower cost to all members of the supply chain.CQRCQUALITYCQI-19
. The DRBFM document also aligns with the SAE J2886 DRBFM Recommended Practice.CQDRQUALITYCQI-24
Sub-tier Supplier Management Process Guideline Self-Assessment5/1/2022 12:00:00 AMUpon completion of this self-assessment, you will receive feedback on your current understanding of:
o General knowledge of CQI-19.
o ISO/TS 16949
Special Process: Heat Treat System Assessment 4th EditionThe CQI-9 4th Edition is a comprehensive audit covering the most common heat treat processes employed by the automotive industry. Intended to provide a common approach to a heat treat
AIAG Membership Page.
Internal Audit
CQI-8 Layered Process Audit
Sub-tier Supplier Management Process Program1/1/0001 12:00:00 AMCQI-19: Sub-tier Supplier Management Process Program is a blended course consisting of three components:
1. CQI-19 Online Self-Assessment (1/2-Hour) - a prerequisite, pre-test
defined process within an organization. This course will help you use the AIAG CQI-8 Guideline to confidently implement LPA at your facility. Participants will become comfortable with an efficient LPA implementation model and the sample formats and reports
topics covered in this online training include:
Introduction to the four phases and appendixes of CQI-19
Introduction of a "Gap Analysis Tool" that will be used in the face to face session to assist the organization
Sub-Tier Supplier Management Process, Readiness ChecklistAIAG has released a common supplier management process developed by tier 1 automotive suppliers for use with tier 2 suppliers (CQI-19). It focuses on current automaker concerns, e.g
Understanding the Plating and Coating Special Process System Assessments1/1/0001 12:00:00 AMIf you are interested in the Plating System Assessment (CQI-11) and Coating System Assessment (CQI-12), this overview course covers the tools
causes to eliminate underlying problems
Effective Problem Solving Guide (CQI-20)
Effective Problem Solving Workshop1/1/0001 12:00:00 AMThis two day workshop is based on the AIAG CQI-20 Effective Problem Solving Guide, 2nd edition. Using case studies, the workshop will give attendees the tools necessary to work through
Warranty Management Guideline CQI-14 Automotive Warranty Management Guideline: A Guideline for Industry Best Practices
The warranty management workgroup was formed by our members to facilitate a change
Effective Problem Solving Overview3/7/2022 12:00:00 AMThis one day workshop is based on the AIAG CQI-20 Effective Problem Solving Guide, 2nd edition. Using case studies, the workshop will give attendees the tools necessary to work through
Leadership's Role in a Successful Layered Process Audit (LPA)6/7/2022 12:00:00 AMThe CQI-8 Layered Process Audits Guideline stresses the importance of leadership involvement in an organization's Layered Process Audit (LPA) activities
is to develop practitioners well versed in the tools provided in the CQI-14 manual in order to provide a warranty process that utilizes best practices. Team involvement in the training is encouraged, when possible, to provide companies with trained practitioners
processes and deliver quality parts and materials. The class is not designed to be technical in nature and will not address the controls that are part of the process tables.
Introduce and review CQI-27 document
Review requirements
will need to download the CQI-17 assessment that comes with the training to their computers and have available for class.
If you are involved in the implementation of, maintenance of, and/or compliance of a soldering system
Brazing | CQI-29
Defines the fundamental requirements for brazing management systems.
and improve manufacturing processes.Examine methods for implementing and applying the principles of statistical process control to manufacturing processes.The new CQI-25 SPC Quick Start Guide is a supplement to the full SPC Manual and provides
in an interactive environment. FMEA, APQP/PPAP, IATF 16949, CQIs, USMCA, IMDS, and more. It’s the same great classroom training but taken where it’s most convenient for you.
And why not? AIAG
, CQIs, GD&T, IMDS, and more. It’s the same great classroom training but taken where it’s most convenient for you.
And why not? AIAG has been writing the book on Automotive Quality, Supply Chain
Order NowAIAG Traceability
AIAG Effective Problem Solving Guide [CQI-20]
in the Quality Core Tools, CQI Special Processes, IATF Lead Auditor, Problem Solving, and more!
Check out our current in-person training options below. Don’t see what you need? New courses will be added frequently, so check back often &ndash
Design Review Based on Failure Modes (DRBFM Reference Guide)
Design Review Based on Failure Modes (DRBFM Reference Guide) [CQI-24]